Siemens 6ES7153-2BA70-0XB0 - Preface

ET 200M
Operating Instructions, 04/2022, EWA-4NEB7806006-09
3
Preface
Purpose of the operating instructions
The information in these operating instructions enables you to operate an IM 153 Interface
Module together with the modules of the S7-300 spectrum in the ET 200M distributed I/O
system as DP slave.
Basic knowledge required
A basic knowledge of automation technology is required to understand the operating
instructions.
Scope of the operating instructions
Module
Order number
As of product version
IM 153-1
6ES7153-1AA03-0XB0
02
IM 153-2
6ES7153-2BA10-0XB0
01
6ES7153-2BA70-0XB0
01
IM 153-4 PN
6ES7153-4AA00-0XB0
01
6ES7153-4AA01-0XB0
01
Agreement: In the following, the designation IM 153-x is used in the operating instructions,
except if a description refers directly to a special version of the IM 153-x.
A variant of the IM 153-1 as well as the IM 153-2 is additionally available as a module for use
in extended environmental conditions ("Outdoor"). You can find the climatic and mechanical
ambient conditions under which you can use this IM 153-1 / -2 in the reference manual "S7-
300 automation system, module specifications
(http://support.automation.siemens.com/WW/view/en/8859629)".
For the new revision of the IM 153-x, we reserve the right to enclose a product information
with current information for the corresponding IM 153-x Interface Module or the operating
instructions.
You can also find this product information on the Internet
(http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo2&aktprim=99&lang
=en). Look for "IM 153-2" there, for example.