Installation
4.2 Installation
ET 200M
60 Operating Instructions, 04/2022, EWA-4NEB7806006-09
4. Drill the marked holes with a diameter of 6.5
+0.2
mm for M6 screws.
5. Screw in an M6 screw to fix the grounding wire.
Drilled hole for extra fixing screw
Groove for drilling extra fixing holes
Hole for connecting a protective conductor
Figure 4-1 Fixing holes of the 2-meter rail
Dimensioned Drawing for Fixing Holes
The fixing-hole dimensions for the rail are shown in the following table.
Table 4- 1 Fixing holes for rails
DIN Rail
Mounting rail for the "Insertion and Removal" function
"Insertion and Re-
To Next Page
Loading...
