Siemens 6ES7153-2BA70-0XB0 - Page 8

Table of contents
ET 200M
8 Operating Instructions, 04/2022, EWA-4NEB7806006-09
3.6.5 Configuration of the ET 200M with non-isolated modules .................................................. 57
4 Installation ........................................................................................................................................... 58
4.1 Overview ........................................................................................................................... 58
4.2 Installation ........................................................................................................................ 58
4.2.1 Mounting Sequence ........................................................................................................... 58
4.2.2 Installing the DIN rail ......................................................................................................... 59
4.2.3 Installing modules on the mounting rail (standard installation) ........................................... 63
4.2.4 Installing Active Bus Modules and Modules (Configuration with Active Bus Modules) .......... 65
4.2.5 After installation ................................................................................................................ 67
4.3 Setting the PROFIBUS address ............................................................................................ 68
5 Connecting .......................................................................................................................................... 70
5.1 Overview ........................................................................................................................... 70
5.2 Connecting PROFIBUS DP ................................................................................................... 70
5.2.1 Connecting the Bus Connector ........................................................................................... 70
5.2.2 Connecting the Fiber-Optic Cable to the IM 153-2 FO ......................................................... 71
5.3 Connecting PROFINET IO .................................................................................................... 74
5.3.1 Connecting IM 153-4 PN .................................................................................................... 74
5.4 Wiring the power supply and modules ............................................................................... 78
5.4.1 Wiring rules ....................................................................................................................... 78
5.4.2 Wiring the Power Supply and IM 153-x ............................................................................... 79
5.4.3 Wiring front connectors of the signal modules ................................................................... 81
5.4.4 Connecting shielded cables via a shield connecting element ............................................... 84
6 Commissioning .................................................................................................................................... 87
6.1 PROFIBUS DP ..................................................................................................................... 87
6.1.1 Commissioning the DP slave .............................................................................................. 87
6.1.2 IM 153-1 start-up ............................................................................................................... 89
6.1.3 IM 153-2 / 153-2 FO start-up .............................................................................................. 90
6.1.4 PROFIBUS DPV1 operation .................................................................................................. 93
6.2 PROFINET IO ...................................................................................................................... 95
6.2.1 Configuring in STEP 7 ........................................................................................................ 95
6.2.2 Configuring by means of GSD file ....................................................................................... 96
6.2.3 Assigning device names to the I/O device ........................................................................... 96
6.2.4 Configuring ports of the IM 153-4 PN ................................................................................. 98
6.2.5 Commissioning ET 200M for PROFINET IO ................................
.......................................... 99
6.2.6 Startup of ET 200M on PROFINET IO ................................................................................. 100
7 Maintenance and service .................................................................................................................. 101
7.1 Wiring of the ET 200M ..................................................................................................... 101
7.2 Replacing the Power Supply Module ................................................................................. 101
7.3 replacing the IM 153-1 ..................................................................................................... 102
7.4 Replacing the IM 153-2 or IM 153-2 FO ............................................................................ 103
7.5 Replacing IM 153-4 PN ..................................................................................................... 106
7.6 Replace modules without the function "Change During Operation" ................................... 108