Remote operation
7.2 Operating via AMS Device Manager
SITRANS LR250 with mA/HART
102 Operating Instructions, 10/2019, A5E32220602-AG
Local Display
Navigate to Configure/Setup > Setup > Local Display for access to:
● Language
●
LCD Fast Mode [see LCD Fast Mode (4.9.)]
● LCD Contrast [see LCD Contrast (4.10.)]
7.2.2 Maintenance and diagnostics
Navigate to Maintenance and Diagnostics for access to:
Remaining Device Lifetime [see Remaining Device Lifetime (4.2.)]
● Lifetime (expected)
● Time in Operation
● Remaining Lifetime
● Activation of Reminders
● Reminder 1 before Lifetime (Required)
● Reminder 2 before Lifetime (Demanded)
Remaining Sensor Lifetime [see Remaining Sensor Lifetime (4.3.)]
● Lifetime (expected)
● Time in Operation
● Remaining Lifetime
● Activation of Reminders
● Reminder 1 before Lifetime (Required)
● Reminder 2 before Lifetime (Demanded)
Service Schedule [see Service Schedule (4.4.)]
● Service Interval
● Time Since Last Service
● Time Until Next Service
● Activation of Reminders
● Reminder 1 before Service (Required)
● Reminder 2 before Service (Demanded)
To Next Page
Loading...
