Siemens 7ML5431 - Features of SIMATIC PDM Rev. 5.2, SP1; SIMATIC PDM Version; Initial Setup

Remote operation
7.1 Operating via SIMATIC PDM
SITRANS LR250 with mA/HART
70 Operating Instructions, 10/2019, A5E32220602-AG
Feature
Function
Auto False Echo Suppression
(Page 80)
Screen out false echoes
TVT Shaper (Page 79) Manual TVT adjustment
Process Variables (Page 87) Monitor process variables and level trend
Security (Page 90) Protect security and communication parameters from modifica-
tion by the maintenance user
7.1.1.3 Features of SIMATIC PDM Rev. 5.2, SP1
SIMATIC PDM Rev. 5.2 SP1 is supported only for basic configuration and troubleshooting.
For advanced features such as the Quick Start wizard, Rev. 6.0 SP3 HF2 or higher is
required.
7.1.1.4 SIMATIC PDM Version
Check the support page of our website to make sure you have the latest version of SIMATIC
PDM, the most recent Service Pack (SP) and the most recent hot fix (HF): SIMATIC PDM
Version (https://support.automation.siemens.com
) Browse to Product Support > Automation
Technology > Process control systems > SIMATIC PCS 7 > System components > Plant
Device Management > SIMATIC PDM.
7.1.2 Initial setup
To ensure that SIMATIC PDM connects properly, complete the following two processes:
1. De-activate buffers
2. Update the Electronic Device Description (EDD)