Service and maintenance
9.4 Disposal
SITRANS LR250 with mA/HART
Operating Instructions, 10/2019, A5E32220602-AG
165
9.4 Disposal
Devices described in this manual should be recycled. They ma
y not be
disposed of in the municipal waste disposal services according to the
Directive 2012/19/EC on waste electronic and electrical equipment
(WEEE).
Devices can be returned to the supplier within the EC, or to a locally ap-
proved disposal
service for eco-friendly recycling. Observe the specific
regulations valid in your country.
Further information about devices containing batteries can be found at:
Information about battery / product return (WEEE)
(https://support.industry.siemens.com/cs/document/109479891/)
9.5 Return procedure
Enclose the bill of lading, return document and decontamination certificate in a clear plastic
pouch and attach it firmly to the outside of the packaging.
Required forms
● Delivery note
● Return goods delivery note
(http://www.siemens.com/processinstrumentation/returngoodsnote
)
with the following information:
– Product (item description)
– Number of returned devices/replacement parts
– Reason for returning the item(s)
● Decontamination declaration (http://www.siemens.com/sc/declarationofdecontamination
)
With this declaration you warrant "that the device/replacement part has been carefully
cleaned and is free of residues. The device/replacement part does not pose a hazard for
humans and the environment."
If the returned device/replacement part has come into contact with poisonous, corrosive,
flammable or water-contaminating substances, you must thoroughly clean and
decontaminate the device/replacement part before returning it in order to ensure that all
hollow areas are free from hazardous substances. Check the item after it has been
cleaned.
Any devices/replacement parts returned without a decontamination declaration will be
cleaned at your expense before further processing.
To Next Page
Loading...
