Remote operation
7.2 Operating via AMS Device Manager
SITRANS LR250 with mA/HART
92 Operating Instructions, 10/2019, A5E32220602-AG
that details how to use the Hart Communication Foundation EDDs in AMS version 11.5 and
above. There is no EDD for the LR250 for AMS version 10.5 to 11.1.
Please check the product page for updated EDDs and application guide.
7.2.1.4 Configuring a new device
1. Check our website to make sure you have the most recent EDD.
Product page (http://www.siemens.com/LR250
)
Go to Support > Software Downloads and if necessary download it. Save the files to your
computer, and extract the zipped file to an easily accessed location.
2. Launch AMS Device Manager– Add Device Type, browse to the unzipped EDD file and
select it.
7.2.1.5 Startup
1. Launch AMS Device Manager. (Application Guides for setting up HART devices with
AMS Device Manager can be downloaded from our website:
Product page (
http://www.siemens.com/LR250)
2. In Device Connection View right-click on the device icon and select Scan Device to
upload parameters from the device.
3. Double click the device icon to open the startup screen. The startup screen shows device
identification details, and a navigation window on the left-hand side of the screen.
To Next Page
Loading...
