Installation
66 Revision 03 * INSTALLATION AND OPERATING INSTRUCTIONS 8DJH * 500-8067.9
Fig. 37: Switchgear transport with crane or fork-lift truck
Ö Lift or lower just slowly, as the switchgear will swing into the center of gravity when
it is lifted.
Ö While lifting, observe parts laid inside such as e.g. cable-type transformers,
connecting cables.
ATTENTION!
Danger due to swinging switchgear. The center of gravity is not always located under
the fixing point.
Ö Lift the switchgear slowly.
Ö Keep the safety distances.
Ö Do not transport more than a maximum width of 2000 mm and a maximum height
of 2.30 m in a block.
To Next Page
Loading...
