3 System Setup
Instructions for Use 3 - 11
Connecting and Disconnecting Transducers
Caution: Ensure that the system is in freeze before connecting and disconnecting transducers.
If a transducer is disconnected before the image is frozen, the system will display an error
message. Select another transducer before continuing to use the system.
You can connect multiple transducers to the ultrasound system, with one transducer being the
active transducer.
1 Three micro-pinless (MP) ports
for array transducers
2 Continuous wave transducer
port
Transducer ports.
To Next Page
Loading...
