10 Virtual Touch Applications
10 - 16 Instructions for Use
In either full-screen or dual-screen format, you can apply one of the following image display
settings to the shear wave velocity and elasticity data: Velocity or Elasticity, Quality, Time, or
Displacement. Each of these settings provides additional context for evaluating and
interpreting the shear wave velocity and elasticity and measured results.
Note: If the shear wave velocity and elasticity within the region of interest is not detectable (for
example, a fluid-filled cyst) or the shear wave velocity and elasticity is non-determinant, the selected
image display setting (except quality) displays only the 2D-mode data in that area (no color is
displayed).
Basic measurements, including area ratio and distance ratio, are also available. You can
perform all basic measurements, such as distance, ellipse, and trace, on either side of a dual
display format.
Virtual Touch IQ supports the following transducers and exam types:
9L4 (breast or thyroid exam)
To Next Page
Loading...
