Siemens Acuson S2000 - Page 402

Appendix E Advanced Feature Controls
E - 8 Instructions for Use
Selection
Description
Opacity Adjusts the percentage of opacity in the volume to smooth image contours.
 0 to 100
Note: For systems without a touch screen, the selection is on the LED panel.
Smooth Smoothing
Adjusts the percentage of smoothing to smooth the data in the volume quadrant.
 0 to 100
Note: For systems without a touch screen, the selection is on the LED panel.
Contrast Adjusts the percentage of contrast.
 0 to 100
Note: For systems without a touch screen, the selection is on the LED panel.
Light Lighting
Adjusts the lighting effects used in gradient light and amnioscopic rendering.
 0 to 100 (in increments of 5)
Note: For systems without a touch screen, the selection is on the LED panel.
Shading Adjusts the shading effects used in surface shading rendering.
 0 to 100 (in increments of 5)
Note: For systems without a touch screen, the selection is on the LED panel.
Priority Tissue Reject (Priority)
Adjusts the threshold for displaying 2D versus color or power data in any pixel. For example,
increasing the color priority results in more color pixel information overlaying the 2D image.
 0 to 15
Note: For systems without a touch screen, the selection is on the LED panel.
Dynamic TCE Dynamic Tissue Contrast Enhancement
Adjusts levels of Dynamic Tissue Contrast Enhancement for 3D images.
 Off
 Low
 Med
 High
Tint Applies the selected tint to the 2D-mode data and the volume rendering.
 Available settings: transducer-dependent
Note: For systems without a touch screen, the selection is on the LED panel.