Appendix E  Advanced Feature Controls 
E - 36  Instructions for Use 
Example of Volume Graph 
For non-contrast studies, the program displays a volume graph. The volume graph depicts the 
values for volume (ml or ml/m
2
) over time (ms), using a Single-Plane Simpson's Rule.  
1  ECG trace 
2  Inactive ED or ES frame 
(indicated by gray dot) 
3  Current frame (indicated by 
vertical line)  
4  Active ED or ES frame 
(indicated by green dot) 
When both the left ventricle and the left atrium are assessed, syngo Auto Left Heart displays 
two volume graphs, one for each chamber. 
Flip Left/Right 
Reorients the image view selection from left-to-right to right-to-left to match the orientation 
of the clip. 
Selects the left ventricle as the active chamber.  
Selects the left atrium as the active chamber. 
A4C  Selects the apical four-chamber image view (non-contrast) for the displayed clip. 
A2C  Selects the apical two-chamber image view (non-contrast) for the displayed clip. 
Selects the contrast apical four-chamber image view for the displayed clip. 
Selects the contrast apical two-chamber image view for the displayed clip. 
F8 function key or 
GAIN FREEZE/CINE  
(Available only for systems without a touch screen) 
Starts or stops playback of the clip in the active view (
 or 
). 
Left or right arrow key  Displays prior or next frame of the clip. 
Note: For systems without a touch screen, the selection is assigned to the 
GAIN FREEZE/CINE control. 
Stop  Stops playback of the clip. 
Note: For systems without a touch screen, the selection is assigned to the 
GAIN FREEZE/CINE control. 
Indicates the selected heart cycle from multiple-cycle clips.