Siemens bt300 - PID Controller 2 (M3.13)

Chapter 4 - Parameters and Menu Structure
Parameters (M3)
97 | 180
Siemens Industry, Inc.
Siemens BT300 HVAC Drive
DPD01809
Building Technologies
2016-06-07
Figure 30: Enable Setpoint 1 for Pressure Loss Compensation.
PID Controller 2 (M3.13)
The PID Controller 2 settings configure the second PID controller, which controls an external device.
The PID Controller 2 consists of the following settings:
● Basic Settings
● Setpoints
● Feedback
● Process Supervision