Siemens bt300 - Analog Outputs (M3.5.4)

Chapter 4 - Parameters and Menu Structure
Parameters (M3)
63 | 180
Siemens Industry, Inc.
Siemens BT300 HVAC Drive
DPD01809
Building Technologies
2016-06-07
Table 35: Digital Outputs, Slot C.
Structure
Parameter
Unit
Min
Max
Default
ID
Description
P3.5.3.3.1
RO1 Function
None
Remote Start
None
12001
See Basic RO Functions Table .
P3.5.3.3.2
RO2 Function
None
Remote Start
None
12002
P3.5.3.3.3
RO3 Function
None
Remote Start
None
12003
P3.5.3.3.4
RO4 Function
None
Remote Start
None
12004
P3.5.3.3.5
RO5 Function
None
Remote Start
None
12005
P3.5.3.3.6
RO6 Function
None
Remote Start
None
12006
Slot D (M3.5.3.4)
If an expansion I/O board that contains a digital/relay output exists in slot D, then this section will be populated with
parameters to represent that I/O.
Table 36: Digital Outputs, Slot D.
Structure
Parameter
Unit
Min
Max
Default
ID
Description
P3.5.3.4.1
RO1 Function
None
Remote Start
None
13001
See Basic RO Functions Table .
P3.5.3.4.2
RO2 Function
None
Remote Start
None
13002
P3.5.3.4.3
RO3 Function
None
Remote Start
None
13003
P3.5.3.4.4
RO4 Function
None
Remote Start
None
13004
P3.5.3.4.5
RO5 Function
None
Remote Start
None
13005
P3.5.3.4.6
RO6 Function
None
Remote Start
None
13006
Slot E (M3.5.3.5)
If an expansion I/O board that contains a digital/relay output exists in slot E, then this section will be populated with
parameters to represent that I/O.
Table 37: Digital Outputs, Slot E.
Structure
Parameter
Unit
Min
Max
Default
ID
Description
P3.5.3.5.1
RO1 Function
None
Remote Start
None
14001
See Basic RO Functions Table .
P3.5.3.5.2
RO2 Function
None
Remote Start
None
14002
P3.5.3.5.3
RO3 Function
None
Remote Start
None
14003
P3.5.3.5.4
RO4 Function
None
Remote Start
None
14004
P3.5.3.5.5
RO5 Function
None
Remote Start
None
14005
P3.5.3.5.6
RO6 Function
None
Remote Start
None
14006
Analog Outputs (M3.5.4)
The analog outputs are very flexible to use. Parameters are functions/features that are connected to the required
analog output terminals. The analog outputs are configured by the slot they exist on. If no expansion board exists,
then the option does not populate with data.