Siemens Climatix Series Short Manual

C. Display screen
Displays menus, parameters, parameter settings, operating settings, etc.
E. Navigation and OK dial
●● Select menus, parameters, parameter values: Turn.
●● Other parameter values: Turn.
●● Go to lower levels or setting pages: Press.
●● Exit setting pages and assume changed values: Press.
●● Go to password enter page: Press long.
D. ESC button
●● Go to next higher level: Press.
●● Exit setting pages and reject changed values: Press.
●● Go back to last active page (after going to password handling page
using the navigation dial): Press.
●● Go back to last active page (after going to Main Menu page using the
Info button): Press.
B. Alarm button
LED:
●● Off: No alarm.
●● Blinking: Alarm pending.
●● Lit continuously: Pending acknowledged alarm.
Press button to do the following:
●● Go to last alarm.
●● Go to alarm list (displays pending alarms and alarm history).
●● Go to alarm history.
●● Go to alarm settings.
●● Acknowledge and reset alarms in alarm list or history.
More information on alarms is available in Section 3, Alarms
A. Info button
●● Go to the main menu and alternate between the main menu and start
page: Press.
More information
Short Manual for Climatix Control System [v. 2.14.10, 2.14.20, 2.14.30 & 2.14.40]
SMCX.130215.02GB Page 4

Siemens Climatix Series Specifications

General

Application	HVAC control
Communication Protocols	BACnet, Modbus, KNX
Inputs	Analog and digital inputs
Outputs	Analog and digital outputs
User Interface	web interface
Power Supply	24 V AC
Protection Class	IP20
Mounting	DIN rail mounting