CP 343-1 Lean
Manual, 10/2012, C79000−G8976−C198−07
55
Approvals
A
Approvals issued
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
Approvals for shipbuilding are not printed on the device type plate.
Current approvals on the Internet
SIMATIC NET products are regularly submitted to the relevant authorities and approval
centers for approvals relating to specific markets and applications.
You will also find the current approvals for the product on the Internet pages of Siemens
Automation Customer Support under the following entry ID:
(http://support.automation.siemens.
com/WW/view/en/18308132)
→ "Entry list" tab, entry type "Certificates"
Approvals for SIMATIC NET products
You will find an overview of the approvals for SIMATIC NET products including approvals for
shipbuilding on the Internet pages of Siemens Automation Customer Support under the
following entry ID:
57337426 (http://support.automation.siemens.
com/WW/view/en/57337426)
EC declaration of conformity
The product meets the requirements and safety objectives of the following EC directives and
it complies with the harmonized European standards (EN) for programmable logic controllers
which are published in the official documentation of the European Union:
● EC Directive 2004/108/EEC "Electromagnetic Compatibility" (EMC Directive)
– Immunity - EN 61000-6-2 : 2005
– Emission - EN 61000-6-4 +A1: 2007/2011
The device is designed for use in an industrial environment.
To Next Page
Loading...
Need help?
General