Siemens CPU 1513-1 PN User Manual

connection cables and I/O modules), as well as easy wiring inside the control cabinet (flexible
connection consisting of front connectors with assembled single conductors).
System diagnostics and alarms
Integrated system diagnostics is activated by default for the CPUs. The different types of
diagnostics are configured instead of programmed. System diagnostics information and
alarms from the drives are displayed consistently and in plain text:
•
On the CPU display
•
In STEP7
•
On the HMI
•
On the Web server
This information is available in RUN mode, but also in STOP mode of the CPU. The diagnostic
information is updated automatically when you configure new hardware components.
The CPU is available as a central interrupt server in up to three project languages. The HMI
takes over the display in the project languages defined for the CPU. If you require alarm texts
in additional languages, you can load them into your HMI via the configured connection. The
CPU, STEP7 and their HMI ensure data consistency without additional engineering steps. The
maintenance work is easier.
3.3 Hardware properties
Article number
6ES7513-1AM03-0AB0
19
Product overview
3.3 Hardware properties
CPU 1513-1 PN (6ES7513-1AM03-0AB0)
Equipment Manual, 11/2022, A5E40881673-AC

Siemens CPU 1513-1 PN Specifications

General

Brand	Siemens
Model	CPU 1513-1 PN
Category	Industrial Equipment
Language	English