Siemens CU240B-2 Applications Manual

Using SINAMICS G120 / G120C / S120 Blocksize converters in marine applications
Application Manual, 11/2019, A5E48346362A
17
Referencing the standard documentation of the
components
4
As explained in the introduction, the standard documentation of the components is also the
basis for marine applications.
This marine-specific manual supplements and amends the standard documentation.
The following documents are used as basis:
● Hardware Installation Manual "SINAMICS G120, Power Module PM240-2",
A5E33294624A AK (01/2019)
→ Download (https://support.industry.siemens.com/cs/de/en/view/109763155)
● Operating Instructions "SINAMICS G120C Converter", A5E34263257A AG (04/2018)
→ Download (https://support.industry.siemens.com/cs/ww/en/view/109757226)
● Operating Instructions "SINAMICS G120 Converter with CU250S-2 Control Units ",
A5E31759476A AG (04/2018)
→ Download (https://support.industry.siemens.com/cs/ww/en/view/109757229)
● Operating Instructions "SINAMICS G120 Converter with CU240B-2 and CU240E-2
Control Units", A5E34259001A AF (04/2018)
→ Download (https://support.industry.siemens.com/cs/ww/en/view/109757230)
● Operating Instructions "SINAMICS G120 Converter with CU230P-2 Control Units ",
A5E34257946A AF (04/2018)
→ Download (https://support.industry.siemens.com/cs/ww/en/view/109757231)
● Operating Instructions "SINAMICS BOP-2, SINAMICS G, Basic Operator Panel 2 (BOP-
2)", A5E37143404A AA (02/2016)
→ Download (https://support.industry.siemens.com/cs/ww/en/view/109483379)
● Operating Instructions "Intelligent Operator Panel 2 (IOP-2)", A5E39549448A AF
(03/2019)
→ Download (https://support.industry.siemens.com/cs/ww/en/view/109767180)
● Equipment Manual "SINAMICS S120 AC Drive", 6SL3097-5AL00-0AP0 (02/2018)
→ Download (https://support.industry.siemens.com/cs/ww/en/view/109757057)
The most recent edition of each manual is the valid version.

Siemens CU240B-2 Specifications

General

Brand	Siemens
Model	CU240B-2
Category	Inverter
Language	English