Marine-specific installation regulations
8.5 External auxiliary power supply
Using SINAMICS G120 / G120C / S120 Blocksize converters in marine applications
Application Manual, 11/2019, A5E48346362A
31
8.5 External auxiliary power supply
It is possible to connect an external 24-V-DC auxiliary power supply. This allows the Control
Unit to be operated independent of the main circuit (DC link).
Control/auxiliary circuits in the converter must fulfill PELV specifications.
It is not permissible to supply the control/auxiliary circuits directly from a 24-V-DC onboard
power supply. A switched-mode power supply must be connected in between in order to
obtain an electrically decoupled, regulated and "disturbance-free" 24-V power supply.
This switched-mode power supply must comply with interference immunity requirements as
laid down in IEC 60533 and those laid down in IACS "Requirements concerning
ELECTRICAL INSTALLATIONS".
To Next Page
Loading...
Need help?
General