17/34
Siemens Building Technologies PXM10 operator unit CM110397en
Siemens Building Automation 31.08.2004
4 Reading and editing
values
4.1 Example: Setting a setpoint
The screenshots below illustrate which values you can edit
and which you can only read:
Figure 4-1 Highlighted values can be edited Figure 4-2 Outlined values are read-only
Step Procedure
1
Navigate to the required setpoint (the relevant line
is highlighted)
2
Select setpoint with OK.
3
A dialog box opens, in which you can set the value.
Figure 4-3 Setting a manual setpoint, with one input
field only
Figure 4-4 Setting the time, with two input fields
To Next Page
Loading...
