6/34
Siemens Building Technologies PXM10 operator unit CM110397en
Building Automation 31.08.2004
1.3 Printing conventions
1.3.1 Text in display panel
Bold text is used to denote the exact text which appears in
the display, e.g. Main menu or Settings.
1.3.2 Labeling of the push-dial and buttons
The main operator control element, the "push-dial", is not
named on the housing.
The "Acknowledge" function ("OK") is integrated into the
push-dial.
The "Info" and "Esc" buttons are labeled accordingly on the
housing.
The "Alarm" button is not named on the housing, but can be
identified by the alarm symbol.
Press the Info button or, more briefly Confirm with OK.
1.3.3 Notes
STOP
Caution The symbol shown here acts as a warning in cases where an
action may result in permanent loss of data.
Important This indicates an important statement which requires your
special attention.
Note
A "Note" qualifies an immediately preceding statement or
statements.
Examples:
To Next Page
Loading...
