Commissioning and Diagnostics
6-54
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Hardware Interrupt of Digital Input Modules
Byte x+4
76 054321
Rising edge on channel 0
Rising edge on channel 1
Rising edge on channel 2
Rising edge on channel 3
Byte x+5, x+6 and x+7 always 00
H
Figure 6-32 Structure as of Byte x+4 for Hardware Interrupt (Digital Input)
Insert/Remove-Module Interrupt
Byte x+4
Byte x+5
Byte x+6
76 054321
Byte x+7
Byte x+8
Not applicable
Type ID of the module; high byte
Type ID of the module; low byte
SKF
ID (STEP 7)
Legend: Type ID of a removed module: 8FC0
H
(unoccupied slot)
Figure 6-33 Structure as of Byte x+4 for Insert/Remove-Module Interrupt
Byte x+4 to x+8 contains the ID of the module that has been removed or inserted.
The interrupt type in byte x+1 indicates whether the modules have been removed
or inserted (see Figure 6-27).
To Next Page
Loading...
