Siemens ET 200S - Wiring Terminal Modules for Electronic Modules

Wiring and Fitting
5-16
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Wiring Terminal Modules for Digital, Analog, and Technology Modules
The terminal assignment of the terminal module depends on which electronic
module is inserted. You will find information on this in the following chapters:
 Terminal modules in Chapter 9
 Digital electronic modules in Chapter 11
 Analog electronic modules in Chapter 12
 Process-related module: See the Process-Related Functions manual
2
3
6
7
15
2
3
4
6
7
8
15
2
3
6
7
15
TM-E15S24-A1 and elec-
tronic module
TM-E15S24-01 and electronic module/
process-related module
TM-E15S23-01 and elec-
tronic module
Channel 0
Channel 1
AUX1 bus (PE) fed through. Connec-
tion to terminals A4 and A8.
AUX1 bus (PE) fed through. No connec-
tion to terminals 4 and 8.
AUX1 bus fed through.
No connection to the ter-
minals.
CH0 CH1
Channel 0/2
CH0/2
Channel 1/3
CH1/3
Channel 1
CH0
Channel 0
CH1
Channel 1
CH0
Channel 0
CH1
Channel 1
CH0
Channel 1/3
CH1/3
Channel 0/2
CH0/2
Channel 0/2
CH0/2
Channel 1/3
CH1/3
TM-E15S26-A1 and electronic
module/process-related module
Channel 0
Channel 1
AUX1 bus (PE) fed through. Connection to ter-
minals A4, A8 and A3, A7.
CH0 CH1
Channel 0/2
CH0/2
Channel 1/3
CH1/3
2
3
4
6
7
8
1
5
A
4
A
3
A
8
A
7
A
4
A
8
26
15
TM-E15S24-AT and
2AI TC High Feature
Channel 0 Channel 1
AUX1 bus (PE) fed through. No connection
to the terminals of the terminal module.
CH0 CH1
Figure 5-9 Wiring Terminal Modules for Electronic Modules