Siemens ET 200S - Page 357

12-1
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Analog Electronic Modules
Introduction
The range of analog electronic modules (EM) includes modules for measuring
voltages and currents. For time-critical measuring of voltage and current, you can
use the High Speed modules. The High Feature modules provide a higher
resolution and greater accuracy.
There are also modules available for connecting thermocouples and resistance
thermometers or resistors.
Modules for connecting loads/actuators to current and voltage outputs complete
the range.
Chapter Overview
Section Description Page
12.1 Analog Value Representation 12-3
12.2 Fundamentals of Analog Value Processing 12-41
12.3 Behavior of the Analog Modules during Operation and in the
Event of Problems
12-53
12.4 Parameters for Analog Electronic Modules 12-57
12.5 2AI U Standard Analog Electronic Module
(6ES7 134-4FB00-0AB0)
12-70
12.6 2AI U High Feature Analog Electronic Module
(6ES7 134-4LB00-0AB0)
12-74
12.7 2AI U High Speed Analog Electronic Module
(6ES7 134-4FB51-0AB0)
12-78
12.8 2AI I 2WIRE Standard Analog Electronic Module
(6ES7 134-4GB00-0AB0)
12-82
12.9 2AI I 2WIRE High Speed Analog Electronic Module
(6ES7 134-4GB51-0AB0)
12-86
12.10 2AI I 4WIRE Standard Analog Electronic Module
(6ES7 134-4GB10-0AB0)
12-90
12.11 2AI I 2/4WIRE High Feature Analog Electronic Module
(6ES7 134-4MB00-0AB0)
12-94
12.12 2AI I 4WIRE High Speed Analog Electronic Module
(6ES7 134-4GB61-0AB0)
12-98
12