Siemens ET 200S - Page 183

General Technical Specifications
7-3
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
UL Recognition
Underwriters Laboratories Inc. in accordance with
 UL 508 (Industrial Control Equipment)
CSA Mark of Conformity
Canadian Standards Association in accordance with
 C22.2 No. 142 (Process Control Equipment)
or
Underwriters Laboratories Inc. in accordance with
 UL 508 (Industrial Control Equipment)
 CSA C22.2 No. 142 (Process Control Equipment)
or
Underwriters Laboratories Inc. in accordance with
 UL 508 (Industrial Control Equipment)
 CSA C22.2 No. 142 (Process Control Equipment)
 UL 1604 (Hazardous Location)
 CSA-213 (Hazardous Location)
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
The ET 200S motor starters do not have a CULUS for HAZ. LOC. approval.
Note
You can find the currently valid certificates and approvals on the type plate of each
module.
HAZ. LOC.