Interface Modules
8-19
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Updating the Firmware of the IM151-1 HIGH FEATURE
Features
As of STEP 7 V5.1, ServicePack 3, you can update the firmware of the IM151-1
HIGH FEATURE.
To update the firmware you receive files (*.UPD) with the current firmware.
Requirements
The IM151-1 HIGH FEATURE in the station whose firmware is to be updated
must be accessible online.
The files with the current firmware version must be available in the file system
of your programming device (PG)/PC.
Procedure
The STEP7 online help system provides information on how to proceed.
Note
We recommend you update the firmware using PROFIBUS-DP.
Restrictions when Operating the Modules with the IM 151 High Feature
The following modules cannot be used with the IM 151 High Feature:
Module Up to Order Number Up to Product
Version
1Count 24V/100kHz 6ES7 138-4DA02-0AB0 1
1Count 5V/500kHz 6ES7 138-4DE00-0AB0 1
1SSI 6ES7 138-4DB00-0AB0 3
1STEP 5V/204kHz 6ES7 138-4DC00-0AB0 3
1SI serial interface module 6ES7 138-4DF00-0AB0 1
Modbus/USS serial interface module 6ES7 138-4DF10-0AB0 1
2AI U High Feature 6ES7 134-4LB00-0AB0 1
2AI I 2/4DMU High Feature 6ES7 134-4MB00-0AB0 1
2AO U High Feature 6ES7 135-4LB00-0AB0 1
To Next Page
Loading...
