Siemens ET 200S - Page 239

Terminal Modules
9-5
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
9.1 TM-P15S23-A1, TM-P15C23-A1, and TM-P15N23-A1 Terminal
Modules (6ES7 193 4CCx0-0AA0)
Order Number
6ES7 193 4CC20-0AA0 (screw-type terminal)
6ES7 193 4CC30-0AA0 (spring terminal)
6ES7 193 4CC70-0AA0 (Fast Connect)
Features
 Terminal module for power module
 Infeed for a new potential group up to the next TM-P terminal module
 Connection by means of screw-type terminal with the TM-P15S23-A1
 Connection by means of spring terminal with the TM-P15C23-A1
 Connection via Fast Connect with the TM-P15N23-A1
 2 x 3 terminals
 Prewiring of the terminal module
 Noise diversion from the electronic module to the DIN rail by means of spring
contact
 Fitting of a shield contact element
 Uninterrupted AUX1 bus with connection to terminals A4 and A8
Terminal Assignment
The following table shows the terminal assignment of the terminal module:
Table 9-3 Terminal Assignment of the TM-P15S23-A1, TM-P15C23-A1, and
TM-P15N23-A1 Terminal Modules
View Terminal Designation
2 L+/L Rated load voltage for inserted power
3 M/ N
module and associated potential
group
AUX1
8
AA
A
4
AUX1 Any connection for PE or
voltage bus up to the maximum rated
load voltage of the module
L+/L
L+/L
4
8
6 L+/L Rated load voltage for inserted power
M/ N
M/ N
26
7 M/ N
module and associated potential
group
AUX1
3
4
7
8
AUX1
AA
A
8
AUX1 Any connection for PE or
voltage bus up to the maximum rated
load voltage of the module