Terminal Modules
9-19
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
9.7 TM-E15S24-A1, TM-E15C24-A1, and TM-E15N24-A1 Terminal
Modules (6ES7 193-4CAx0-0AA0)
Order Number
6ES7 193-4CA20-0AA0 (screw-type terminal)
6ES7 193-4CA30-0AA0 (spring terminal)
6ES7 193-4CA70-0AA0 (Fast Connect)
Features
Terminal module for electronic modules
Connection by means of screw-type terminal with the TM-E15S24-A1
Connection by means of spring terminal with the TM-E15C24-A1
Connection via Fast Connect with the TM-E15N24-A1
2 x 4 terminals
Prewiring of the terminal module
Noise diversion from the electronic module to the DIN rail by means of spring
contact
Fitting of a shield contact element
Uninterrupted AUX1 bus with connection to terminals A4 and A8
Terminal Assignment
The following table shows the terminal assignment of the terminal module:
Table 9-8 Terminal Assignment of the TM-E15S24-A1, TM-E15C24-A1, and
TM-E15N24-A1 Terminal Modules
View Terminal Designation
1 The assignment depends on which electronic module
2
is inserted
3
15
A
4
AUX1 Any connection for PE or voltage bus
up to the maximum rated load
voltage of the module
26
5 The assignment depends on which electronic module
26
6
is inserted
37
7
48
AA
A
8
AUX1 Any connection for PE or voltage bus
up to the maximum rated load
voltage of the module
To Next Page
Loading...
