Terminal Modules
9-21
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
9.8 TM-E15S24-01, TM-E15C24-01, and TM-E15N24-01 Terminal
Modules (6ES7 193-4CBx0-0AA0)
Order Number
6ES7 193-4CB20-0AA0 (screw-type terminal)
6ES7 193-4CB30-0AA0 (spring terminal)
6ES7 193-4CB70-0AA0 (Fast Connect)
Features
Terminal module for electronic modules
Connection by means of screw-type terminal with the TM-E15S24-01
Connection by means of spring terminal with the TM-E15C24-01
Connection via Fast Connect with the TM-E15N24-01
2 x 4 terminals
Prewiring of the terminal module
Noise diversion from the electronic module to the DIN rail by means of spring
contact
Fitting of a shield contact element
Uninterrupted AUX1 bus without connection to terminals 4 and 8
Terminal Assignment
The following table shows the terminal assignment of the terminal module:
Table 9-9 Terminal Assignment of the TM-E15S24-01, TM-E15C24-01, and
TM-E15N24-01 Terminal Modules
View Terminal Designation
1 The assignment depends on which electronic module
2
is inserted
No access to the AUX1 bus.
3
Terminals not used by the electronic module can be
used for unneeded connecting wires. The permitted
1
5
4
used for unneeded connecting wires. The permitted
potential corresponds to the potential of the electronic
1
5
5
module used.
26
6
37
7
48
8
To Next Page
Loading...
