Digital Electronic Modules
11-8
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Technical Specifications
Dimensions and Weight
Dimensions W H D (mm) 15 81 52
Weight Approx. 35 g
Data for Specific Modules
Number of inputs 2
Length of cable
Unshielded Max. 600 m
Shielded Max. 1000 m
Voltage, Currents, Potentials
Rated supply voltage (from
the power module)
24 VDC
Reverse polarity
protection
Yes
Isolation
Between the channels No
Between the channels
and backplane bus
Yes
Permissible potential diffe-
rence
Between the different
circuits
75 VDC, 60 VAC
Insulation tested with 500 VDC
Current consumption
From supply voltage Dependent on the
sensor
Power dissipation of the mo-
dule
Typ. 0.4 W
Status, Interrupts, Diagnostics
Status display Green LED per
channel
Diagnostic functions No
Sensor Supply Output
Output voltage
With load Min. L+ (–0.5 V)
Output current
Rated value 500 mA
Permitted Range 0 to 500 mA
Data for Selecting a Sensor
Input voltage
Rated value
For signal “1”
For signal “0”
24 VDC
15 to 30 V
-30 to 5 V
Input current
At signal “1” Typ. 7 mA
(at 24 V)
Input Delay
At “0” to “1” Typ. 3 ms
(2.0 to 4.5 ms)
At “1” to “0” Typ. 3 ms
(2.0 to 4.5 ms)
Input characteristic curve To IEC 61131,
Type 1
Connection of two-wire
BEROs
Possible
Permitted bias current Max. 1.5 mA
To Next Page
Loading...
