Order Numbers
A-8
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Connecting cable for 4 IQ-SENSE electronic module
The following table contains the connecting cables for the sensors on the 4
IQ-SENSE electronic module. You will also find these connecting cables in the NS
BERO catalog (in the chapter on 3RX1 plug connections).
Table A-10 Connecting Cable for 4 IQ-SENSE Electronic Module
Designation
Order Number
Cable box (M12) for screw-type attachment with 5 m
PUR connecting cable 3 x 0.34 mm
2
3RX1533
Cable box (M12) for screw-type attachment with 5 m
PUR connecting cable 4 x 0.34 mm
2
3RX1536
STEP 7 and SIMATIC S7 Manuals
To program and commission the ET 200S with STEP 7, you require one of the
following manuals.
Table A-11 STEP 7 and SIMATIC S7 Manuals
Designation
Contents
S7-300 Programmable Controller
documentation package consisting of:
Includes:
“CPU Specifications CPUs 312 IFM
to 318-2 DP” Reference Manual
“CPU Specifications CPUs 312 C to
314 C-2 PtP/DP” Reference Manual
Operating instructions and a description of
the functions and technical specifications of
the CPUs
“Technological Functions” manual
including CD with examples
Description of the different process-related
functions
S7-300 Programmable Controller
Hardware and Installation Manual
Description of the configuration, mounting,
wiring, networking and commissioning of an
S7-300
“Module Specifications” Reference
Manual
Functional descriptions and technical
specifications of the signal modules, power
supply modules and interface modules
Instruction List ”312 IFM to
318-2 DP” (can also be ordered
separately)
Instruction List ”CPU 312 C to
314 C-2 PtP/DP” (can also be
ordered separately)
List of the instruction set of CPUs and their
execution times List of executable blocks
and their execution times
Getting Started Examples of different commissioning steps
leading up to a functional application
To Next Page
Loading...
