Siemens ET 200S - Page 62

Configuration Options
3-14
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Table 3-5 Assignment of TM-E Terminal Modules and Electronic Modules
Electronic Modules TM-E terminal modules for electronic modules
Order number
6ES7 193...
30S46-A130S44-0115S24-AT15S23-0115S24-0115S24-A115S26-A1
Screw-type term.
Order number
6ES7 193...
...4CF40-
0AA0
...4CG20-
0AA0
...4CL20-
0AA0
...4CB00-
0AA0
...4CB20-
0AA0
...4CA20-
0AA0
...4CA40-
0AA0
Screw-type term.
Spring terminal
30C46-A130C44-0115C24-AT15C23-0115C24-0115C24-A115C26-A1
Order number
6ES7 193...
Spring terminal
...4CF50-
0AA0
...4CG30-
0AA0
...4CL30-
0AA0
...4CB10-
0AA0
...4CB30-
0AA0
...4CA30-
0AA0
...4CA50-
0AA0
Order number
6ES7 193...
Fast Connect
---------
15N23-0115N24-0115N24-A115N26-A1
Order number
6ES7 193...
Fast Connect
---------
...4CB60-
0AA0
...4CB70-
0AA0
...4CA70-
0AA0
...4CA80-
0AA0
Order number
6ES7 193...
RESERVE (width 15
mm)
    
RESERVE (width 30
mm)
 
* See the ET 200S Fail-Safe Modules manual in the S7 F Systems documentation package
The Power Modules You Can Use with the Various Electronic Modules:
Power Modules Electronic Modules
PM-E 24 VDC Can be used with all electronic modules except the 2DI 120 VAC Standard, 2DI
230 VAC Standard, and 2DO 120/230 VAC.
PM-E 24–48 VDC/
120–230 VAC
Can be used with all electronic modules.
PM-E F 24 VDC
PROFIsafe*
Shuts down digital output modules safely.
PM-D F 24 VDC
PROFISafe*
For PM-D F 24 VDC PROFISafe* power module
* See the ET 200S Fail-Safe Modules manual in the S7 F Systems documentation package