Siemens ET 200S - Page 83

Installation
4-3
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Installation Measurements
Table 4-1 Installation Measurements
Mea-
sure-
ments
Installa-
tion
width
 Interface module: 45 mm
 Terminal modules with electronic modules: 15 mm or 30 mm
 Terminating module: 7.5 mm
Installa-
tion
height
 Interface module: 119.5 mm
 Electronic module with terminal module:
– 3 levels with screw-type or spring terminals: 119.5 mm
– 3 levels with Fast Connect: 143 mm
– 3 levels with screw-type or spring terminals and shield contact:
151.5 mm
– 3 levels with Fast Connect and shield contact: 175 mm
– 4 levels with screw-type or spring terminals: 132 mm
– 4 levels with Fast Connect: 164 mm
– 4 levels with screw-type or spring terminals and shield contact: 164 mm
– 4 levels with Fast Connect and shield contact: 196 mm
– 6 levels with screw-type or spring terminals: 157 mm
– 6 levels with Fast Connect: 204 mm
– 6 levels with screw-type or spring terminals and shield contact: 189 mm
– 6 levels with Fast Connect and shield contact: 236 mm
– 7 levels with screw-type terminal: 196.5 mm
Installa-
tion
depth
 ET 200S on rail with 7.5 mm depth: 75 mm
 ET 200S on rail with 15 mm depth: 82.5 mm