Building Technologies A6V10334410_h_en_--
Fire Safety 2015-09-29
3.5.2 Standalone operation
A fire control panel is not essential to operate the aspirating smoke detector.
Various functions can be directly controlled by the aspirating smoke detector. In the
case of standalone operation, communication transponder FDCC221S must not be
installed.
In standalone operation, the aspirating smoke detector is configured using a PC
with the 'FXS2051 ASD Configuration Tool' software.
3.6 Accessories
3.6.1 Communication transponder FDCC221S
For connecting the aspirating smoke detector to
FDnet/C-NET
Integrated 'line separator' function
Additional MC line interface (port)
Tool-free installation on an intended PCB slot
Supplied with:
– 2 spacer bolts
– 4-pin terminal
– ID adhesive label
Compatible with:
– Aspirating smoke detector FDA241
– Aspirating smoke detector FDA221
Order no.: S24218-A201-A2
See also
Installing communication transponder FDCC221S [➙ 62]
3.6.2 Power supply kit A (70 W) FP120-Z1
For converting the mains voltage into system
voltage
For charging connected batteries
For supplying devices according to EN 54-4
Choice of input voltage between AC 115 V or
AC 230 V
Compatible with:
– Battery FA2003-A1
– Battery FA2004-A1
– Battery FA2005-A1
For details, see document A6V10393194
Order no.: S4400-S122-A1
See also
External power unit and batteries [➙ 31]
To Next Page
Loading...
Need help?
General
