1BSafety notes
2 Safety notes
This chapter describes the danger levels and the relevant safety regulations
applicable for the use of the products from Siemens Building Technologies. Please
read the work instructions as well as the chapter ’About this document’ before
beginning any work.
2.1 Signal words and symbols
2.1.1 Classification and meaning of signal words
The danger level – that is, the severity and probability of danger – is indicated by
the signal words listed below. Non-observance may lead to the consequences
indicated:
DANGER! Imminent danger!
z May cause danger to life or serious bodily injury!
WARNING! Dangerous situation!
z May cause serious bodily harm.
CAUTION! May cause dangerous situations!
z May cause light injuries!
NOTE! Possibly harmful situation!
z May cause damage to the product or to objects in the immediate vicinity of
the product!
2.1.2 Symbols and their meaning
The symbols listed below indicate the nature and origin of the danger.
General danger
Electrical voltage
Example for an indication of danger
The example below illustrates the appearance and form of danger warnings in our
documents.
DANGER!
External voltage
Disconnect the module from the power supply.
2.1.3 Classification and meaning of additional symbols
Tips and information.
Refers to extremely important or critical decisions to be taken into account before continuing the work.
7
007002_e_en_--.doc
Fire Safety & Security Products 11.2007
To Next Page
Loading...
