Open service menu / Select menu
6
28 | 40
6.7.5 Display List Technical Message
The ↑ 'Technical messages' list with all technical messages in the configured
↑ visibility can be displayed as follows:
Displaying the ↑ 'Technical messages' list
ϖ A button is configured with the 'Show' 'Technical messages' function
ϖ The button is labelled accordingly
κ Press <'Show' 'Technical messages'>.
All 'Technical messages' which have occurred within the configured ↑ visibility
are indicated on the display.
Example for 'TECHNICAL' list:
005 Technical messages
––----
TECHNICAL
Ventilation flap Office 22
TECHNICAL
Valve Corridor 3rd floor
––––––––––––––––––------------------
--
Zone
Zone
–––––––––––––––––––––––--------
---
2/4
2/1
------
Display of the list with 2 of 5 'Technical messages'
See also
1 Maximum number of events that can be displayed [➙ 14]
6.8 Open service menu / Select menu item
To open the service menu a keyboard shortcut as well as a password are required.
The service menu can only be opened when
Opening the service menu
ϖ No 'Event' are displayed.
1. Press <More Alarms>, with <Reset> button pressed.
The password dialog is shown.
2. Enter the password and confirm.
The service menu is open.
Select menu item
● In the service menu the highlighted menu item can be executed by pressing the
<More Alarms> button or by opening the sub-menu.
● The buttons <▲> and <▼> highlight the next menu item.
See also
1 Service menu [➙ 18]
To Next Page
Loading...
Need help?
General
