130
Web configurator – Setting the phone using a PC
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 24.03.2010
Version 8, 03.09.2008
Saving settings on the phone
¤ Select Set to save the changes.
The Connections list will be shown after saving (
£ Figure 2 on Page 121).
If you want to discard the changes:
¤ Select the Cancel button.
If all fields are to be reset to the default settings:
¤ Select the Delete button.
Fields without default settings are empty.
Activating a new connection
If you have configured a new VoIP connection, you must also activate it.
In the Connections list:
¤ Activate the relevant option in the Active column ( = activated).
Your phone will register itself with the VoIP provider using the relevant access data.
Refresh the Web page (e.g. by pressing F5).
The Status Registered column will appear if registration was successful. You can
now be reached on this VoIP phone number.
Configuring the fixed line connection
You can assign a name to your fixed line connection. This name is used to display
the connection on the handset and the Web configurator interface, e.g. when allo-
cating send and receive numbers (
£ Page 137), for the call display (£ Page 44).
¤ Open the following Web page: Settings ¢ Telep hony ¢ Connections.
¤ Select the Edit button in the Fixed Line Connection area.
¤ Enter your fixed line network number or the name of your choice
(max. 16 characters) for your fixed line connection in the Connection Name or
Number field. The default is "Fixed Line".
Please note
If you do not make any entries for a prolonged period, the connection to the Web
configurator is automatically terminated. Unsaved entries are lost. If necessary,
save entries as you go along. You can subsequently continue the entry and make
changes if necessary.
Please note
Once the new entry has been made, the VoIP phone number is assigned to each
handset as a receive number. For how to adjust the assignment,
£ Page 137.
To Next Page
Loading...
