131
Web configurator – Setting the phone using a PC
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 24.03.2010
Version 8, 03.09.2008
Configuring the Gigaset.net connection
Your phone is assigned a Gigaset.net phone number by default. As soon as you
have connected your phone to the Internet, you can make calls using the
Gigaset.net and receive calls from other Gigaset.net subscribers, provided that your
Gigaset.net connection has been activated. You can deactivate the Gigaset.net con-
nection.
Activating/deactivating the Gigaset.net connection
¤ Open the following Web page: Settings ¢ Telep hony ¢ Connections.
The list of connections will be displayed (
£ Figure 2 on Page 121).
¤ In the Gigaset.net area: use the option in the Active column to activate ( ) or
deactivate ( ) the Gigaset.net connection.
Activating/deactivating the STUN server of the Gigaset.net connection
The Gigaset.net connection is preconfigured in your phone. The Gigaset.net uses a
STUN server as standard. In the sent data packets, Gigaset.net replaces the private
IP address of your phone with its public IP address.
If you operate your phone behind a router with symmetrical NAT, STUN cannot be
used. Otherwise, when making Gigaset.net calls you will not be able to hear the
caller.
In this case, deactivate STUN for the Gigaset.net connection.
¤ Open the following Web page: Settings ¢ Telep hony ¢ Connections.
¤ Select Edit in the Gigaset.net area.
STUN enabled
Select No to deactivate STUN.
Select Ye s if you want your phone to use STUN.
¤ Select Set to save the changes.
Please note
If you do not use your Gigaset.net connection for six weeks, it is automatically
deactivated. You cannot be reached for calls from Gigaset.net.
The connection is reactivated:
u as soon as you start a search in the Gigaset.net directory (£ Page 50) or
u make a call via Gigaset.net, i.e. dial a number ending in #9 (two attempts may
be necessary) or
u activate the connection via the Web configurator as described above.
To Next Page
Loading...
