Siemens Gigaset A580IP - Page 24

23
First steps
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / starting.fm / 24.03.2010
Version 8, 03.09.2008
Entering an auto-configuration code
All data necessary for VoIP telephony is loaded directly from the Internet to your
phone.
When all the data has been successfully loaded onto your phone, Saved appears on
the display.
¤ For further information, please see "Completing the VoIP settings",
£ Page 27.
Your VoIP provider has supplied
you with an authentication name/
password and, where applicable,
auser name:
¤ Press the key below §No§ on the dis-
play screen.
¤ For further information, please see
"Downloading VoIP provider
data"
£ Page 24.
You have received an auto-configura-
tion code (Activation Code) from your
VoIP provider:
¤ Press the key below §Yes§ on the dis-
play screen.
¤ For further information, please see
"Entering an auto-configuration
code".
¤ Enter your auto-configuration code using
the keypad (max. 32 characters).
¤ Press the key below §OK§ on the display
screen.
Do you have a
code for auto
configuration?
No
 Ye s
Or
Code:
Ç
 OK