59
Network services
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / netservices_SAG.fm / 24.03.2010
Version 8, 03.09.2008
Activating/deactivating call waiting
Precondition: Your phone will permit two parallel VoIP connections (see Allow 1
VoIP call only,
£ Page 133).
If call waiting is activated, a caller on one of your VoIP connections will hear the
ringing tone if you are already on a call using this VoIP connection. This call is
announced acoustically and visually on your handset screen.
Calls on the fixed line connection are not signalled as call waiting. They are sig-
nalled on other registered handsets to which the fixed line number has been allo-
cated as a receive number. If no other handset is available, the caller will hear the
busy tone.
For information on accepting/rejecting a waiting call,
£ Page 60.
§Menu§ ¢Select Services ¢VoIP ¢ For All Calls ¢ Call Waiting
On / Off Select and press §OK§.
a Press and hold (idle status).
Functions during a call
Precondition: Your phone will permit two parallel VoIP connections
(see Allow 1 VoIP call only,
£ Page 133).
Consultation call (external)
During an external call:
§Menu§ ¢External Call
Select and press
§OK§.
~ Enter the number (if necessary the suffix) or copy it from the directory.
c Press the talk key.
The number is always dialled via VoIP. If no suffix is entered, it is selected via the
handset's VoIP send number.
Please note
The setting applies to all VoIP phone numbers. It does not affect the procedure for
call waiting on the fixed line network. For how to activate/deactivate call waiting
for the fixed line connection,
£ Page 56.
Please note
After a few seconds, the number selected for a consultation call is saved in the
redial list.
To Next Page
Loading...
