60
Network services
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / netservices_SAG.fm / 24.03.2010
Version 8, 03.09.2008
If the participant does not answer:
¤ Press the display key §End§, to return to the waiting call.
If the participant answers, you have the following options:
u Toggling:
¤ Use q to swap between the participants.
¤ End call with active participant: §Menu§ ¢ End Active Call.
Press the end call key a, to end the current call. The participant who was
previously waiting will automatically call you back.
u Conference call:
¤ Talk to both participants: §Menu§ ¢ Conference Call.
¤ End conference call (toggle): §Menu§ ¢End Conference.
¤ End call with both participants: press the end call key a.
u Call transfer (provider-dependent):
You can connect the two external participants.
Preconditions:
– You are toggling calls and you phoned the participant currently active your-
self.
– You have activated call forwarding via the Web configurator (
£ Page 145).
Depending on the setting in the Web configurator (
£ Page 145):
¤ Press the end call key a.
Or:
¤ Press the S key.
If call forwarding was successful, a message will appear to this effect.
The handset will then switch to idle.
If call forwarding was not successful, the participant who was previously waiting
will call you back.
Accepting a waiting call
Precondition: Call waiting is activated (£ Page 59).
§Menu§ ¢Accept Call Waiting
You have the option of toggling or holding a conference call.
Rejecting a waiting call
§Menu§ ¢Reject Call Waiting
The caller hears the busy tone.
Please note
u If the first call was an internal call, the internal connection is ended.
u An internal, waiting call is shown on the display. You can neither accept the
internal call nor reject it.
u If an SMS is received, you will hear a call waiting tone (without screen display).
To Next Page
Loading...
