48
Using the directory and lists Directory/call-by-call list
Gigaset C470 IP / EN for AUS / A31008-M1916-C401-2-7619 / directories_charges.fm / 17.12.07
Version 2.1, 08.01.2007
Selecting entries in the directory and call-by-call list
s / C Open the directory or call-by-call list.
You have the following options:
u Use q to scroll to the entry until the required name is selected.
u Enter the first character of the name, or scroll to the entry using s if required.
Dialling with the directory/call-by-call list
s / C ¢ q (Select entry; page 48)
c Briefly press/press and hold the talk key. The number is dialled using the
selected connection type (page 30).
Managing directory/call-by-call list entries
s / C ¢ q (Select entry; page 48)
Viewing entries
§View§ Press the display key. The entry is displayed.
Back with
§OK§.
Editing entries
§View§ §Edit§ Press the display keys one after the other.
¤ Carry out changes and save.
Using other functions
s / C ¢ q (Select entry; page 48)
§Options§ Open menu.
The following functions can be selected with q:
Display Number
Change or add to a saved number and then dial it (press talk key c) or save it as a new
entry; to do so, press Ó after the number is displayed.
Edit Entry
Edit selected entry.
Delete Entry
Delete selected entry.
VIP Entry (directory only)
Mark a directory entry as a VIP (Very Important Person) and assign a specific ringer tone
to it. You can then recognise VIP calls from the ringer tone.
Precondition: Calling Line Identification (page 33).
Copy Entry
Send a single entry to a handset (page 49).
Delete List
Delete all entries in the directory or in the call-by-call list.
Please note:
You can only dial IP addresses via VoIP.
To Next Page
Loading...
