Siemens Gigaset S790 - Connecting the Headset; Connecting the USB Data Cable

18
First steps
Gigaset S790-S795 / en / A31008-M2121-R301-2-3S19 / starting.fm / 22.04.2010
Version 4.1, 21.11.2007
Connecting the headset
After removing the plastic cover, you can connect a head-
set to the left-hand side of your telephone with the 2.5 mm
jack connector.
See the relevant product page at www.gigaset.com
for
information on recommended headsets.
The headset volume corresponds to the settings for the
handset volume (
¢ page 54).
After using the headset, replace the plastic cover to enable
optimum sound in speaker mode.
.
Connecting the USB data cable
You can connect a standard USB data cable with a mini-B connector to the back of
your handset to connect the handset to a PC (
¢ page 63).
¤ Remove the belt clip (if attached)
(
¢ page 13).
¤ Remove the battery cover (¢ page 12).
¤ Connect the USB data cable to the USB
socket
1.
Warning
Do not charge the handset in charging unit or base while the headset is
connected.
Please note
Please connect your handset directly to
the PC; do not connect via a USB hub.
1