Siemens Gigaset S790 - Resetting Fast Access for the Answering Machine Using Key 1; Operating When on the Move (Remote Operation)

42
Operating the Gigaset S795 base answering machine
Gigaset S790-S795 / en / A31008-M2121-R301-2-3S19 / answering_m.fm / 22.04.2010
Version 4.1, 21.11.2007
When operating remotely (¢page 42), you
can tell after approx. 15 seconds that there
are no new messages (otherwise the
answering machine would have already
accepted your call). There are no call charges
if you hang up now.
Changing the language for voice
prompt and pre-recorded
announcement
v Open the main menu.
*#Q5#2
Enter digits and press
Q
§OK§ To set English.
 §OK§ To set French.
2 §OK§ To set Spanish.
Resetting fast access for
the answering machine using
key 1
By default, key  has been assigned for
fast access to the integrated answering
machine. However, if you have set the net-
work mailbox for fast access (
¢ page 43),
you can reset this setting.
v
¢
Ì
¢ Set Key 1
Answering Machine
Select and press
§OK§.
Once you have selected the answering
machine, press and hold key . You are
connected directly.
The setting for fast access applies to all regis-
tered handsets.
Operating when on the move
(remote operation)
You can check and activate your answering
machine from any other telephone (hotel,
pay phone etc.),.
Prerequisites:
u You have set a system PIN other than
0000 (
¢ page 58).
u The phone you are using for remote oper-
ation has tone dialing (DTMF), i.e., you
hear different tones when you press the
keys. Alternatively, you can use a code
transmitter (available from your mobile
phone retailer).
Calling the answering machine and
playing back messages
~ Dial your own number.
9~ When you hear your announce-
ment, press 9 and enter the
system PIN.
You are informed whether any new mes-
sages have been recorded. The messages are
now played back. You can now operate the
answering machine with the keypad.
The following keys are used for operation:
A To return to the start of the cur-
rent message.
Press twice to go back to the
previous message.
B Stop playback. Press again to
resume.
3 Go to the next message.
0 Delete current message.
Activating the answering machine
¤ Phone home and let the phone ring until
you hear: "Please enter PIN".
~ Enter system PIN.
Your answering machine is activated. It tells
you how much memory time is left.
The messages are now played back.
The answering machine cannot be deacti-
vated remotely.
•