Siemens Gigaset S790 - Displaying Missed Appointments, Anniversaries; Setting the Alarm Clock

46
Setting the alarm clock
Gigaset S790-S795 / en / A31008-M2121-R301-2-3S19 / registr_sett.fm / 22.04.2010
Version 4.1, 21.11.2007
Displaying missed
appointments, anniversaries
Missed appointments/anniversaries
(
¢ page 34) are displayed in the Missed
Alarms list if:
u You do not accept an appointment/anni-
versary.
u The appointment/anniversary was sig-
naled during a phone call.
u The handset is deactivated at the time of
the appointment/anniversary.
u Automatic redial was activated at the
time of an appointment/anniversary
(
¢ page 35).
The icon n and the number of new entries
are shown in the display. The most recent
entry is at the head of the list.
Open the list by pressing the message key
f(
¢ page 37) or via the menu:
v ¢
Í
¢ Missed Alarms
Select appointment/anniver-
sary.
Information about the appoint-
ment/anniversary displays. A
missed appointment displays
with the appointment name
and a missed anniversary dis-
plays with the last name and
first name. The date and time
will also be given.
§Delete§ Delete appointment.
If 10 entries are already stored in the list, the
next appointment reminder will delete the
oldest entry.
Setting the alarm clock
Prerequisite: The date and time have
already been set (
¢ page 15).
Activating/deactivating and
setting the alarm clock
v ¢
á
¢ Alarm Clock
¤ You can enter data in the following fields:
Activation:
Select On or Off.
Time:
Enter the wake-up time in 4-digit format,
then select AM/PM.
Occurrence:
Select Daily or Monday-Friday.
Volume:
Set the volume (1–6). You can choose
between five volumes (1–5; e.g.,
volume 3 = Š) and the "crescendo"
ringtone (6; volume increases with each
ring = ‡).
Melody:
Select melody.
§Save§ Press the display key.
In idle status, the ¼ icon and wake-up time
are displayed.
A wake-up call is signaled on the display and
with the selected ringtone (
¢ page 3). The
wake-up call sounds for 60 seconds. If no key
is pressed, the wake-up call is repeated twice
at five minute intervals and then switched
off.
While the wake-up call sounds, you can
permanently change the volume by press-
ing the side keys ø (louder) or ÷ (quieter).
During a call, the wake-up call is only sig-
naled by a short tone.