Siemens Gigaset S790 - The Base at a Glance

4
The base at a glance
Gigaset S790-S795 / en / A31008-M2121-R301-2-3S19 / overview.fm / 22.04.2010
Version 4.1, 21.11.2007
The base at a glance
You can use the keys on the base to register
handsets to the base, search for handsets
(paging)
(¢ page 48) and operate the inte-
grated answering machine (Gigaset S795
only).
Gigaset S795 base
1 Registration/Paging button
Press briefly: search for handsets (paging)
(
¢page 48).
Press and hold: register handsets and DECT
devices (
¢page 47).
2 On/Off button
Activating/deactivating the answering ma-
chine.
3 Display
Lights up: answering machine is activated.
The number of saved messages displays.
00 flashes: the answering machine is record-
ing a new message.
Flashes slowly: there are new messages. The
number of new messages displays.
99 flashes quickly: the answering machine is
full.
During message playback:
4 Play/Stop button
Play back new messages from answering
machine or cancel playback (press briefly).
Play back new and old messages (press and
hold).
5 Skip to next message (press once) or skip
ahead two messages (press twice).
6 Skip back five seconds (press briefly once),
skip back to the beginning of the message
(press and hold) or skip back to the previous
message (press twice).
7 Delete current message.
8 Adjust volume during message playback:
÷
= quieter;
ø = louder.
While an external call is being signaled: adjust
ringtone volume.
Please note:
If the answering machine is being operated
from a handset or if it is recording a message
(00 flashes), it cannot be operated from the
base at the same time.
Gigaset S790 base
Registration/Paging button
– Press briefly: search for handsets (paging)
(
¢page 48).
– Press and hold: register handsets and DECT
devices (
¢page 47).
6
8
2
7
4
1
5
3