58
Setting the base
Gigaset S790-S795 / en / A31008-M2121-R301-2-3S19 / registr_sett.fm / 22.04.2010
Version 4.1, 21.11.2007
Setting the base
The base settings are changed using a regis-
tered Gigaset S79H handset.
Changing the Gigaset S795
base ringtones
u Volume:
You can choose between five volumes (1–
5; e.g., volume 3 = Š) and the "cre-
scendo" ringtone (6; volume increases
with each ring = ‡).
u Ringtones:
You can select a ringtone from a list of
pre-loaded melodies.
In idle status:
v
¢
Ï
¢ Audio Settings
¢ Ringtones (Base)
¤ You can enter data in the following fields:
r Set volume.
s Scroll to the next line.
r Set melody.
§Save§ Press the display key to save the
setting.
Activating/deactivating
music on hold
v ¢
Ï
¢ Audio Settings
¢ Music on Hold
Press §Change§ to activate or deactivate the
music on hold (³ = on).
Protecting against
unauthorized access
Protect the system settings of the base with
a PIN known only to yourself. The system PIN
must be entered when, for example, regis-
tering/de-registering a handset to/from the
base or when restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set on
the base (default setting: 0000) to a 4-digit
PIN known only by you.
Gigaset S795: Setting a system PIN facilitates
remote operation of the answering machine
(
¢ page 42).
v ¢
Ï
¢ System ¢ System PIN
~ Enter the current system PIN
and press
§OK§.
~ Enter your new system PIN and
press
§OK§.
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code 0000:
1. Disconnect the power cable from the
base.
2. Hold down the registration/paging key on
the base while reconnecting the power
cable to the base.
3. Hold down the key for at least 5 seconds.
4. The base has now been reset and the sys-
tem PIN set to 0000.
Resetting the base to the
factory settings
When the settings are restored:
u Date and time are retained
u Handsets are still registered
u Eco Mode is activated deactivated,
u The system PIN is not reset.
v ¢
Ï
¢ System ¢ Base Reset
~ Enter the system PIN and
press
§OK§.
§Yes§ Press the display key.
Please note
All handsets are de-registered and must
be re-registered. All settings are reset to
the factory settings.
To Next Page
Loading...
