Need help?Do you have a question about the Siemens GM-SG and is the answer not in the manual?
General| Number of Ports | 8 |
|---|---|
| Switching Capacity | 16 Gbps |
| MAC Address Table | 8K |
| Type | Managed |
| Mounting | DIN-Rail |
| Port Type | Gigabit Ethernet |
| Ports | 8x RJ45 |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% non-condensing |
General overview of the switchgear and manual's purpose.
Defines hazard indicators (Danger, Warning, Caution).
Defines the qualifications for personnel.
Contact information for support and service.
Emphasizes the importance of proper installation and maintenance.
Outlines the types of switchgear covered by the manual.
Details the metal-clad construction and internal isolation.
Procedures for accepting, identifying, and inspecting shipments.
Steps for examining equipment and reporting transit damage.
Methods for safely handling switchgear sections.
Techniques for moving equipment without a crane.
Steps for positioning and connecting equipment sections.
Guidelines for storing switchgear in various environments.
Specific storage requirements for related components.
Pre-installation study and review of drawings.
General and specific foundation needs for installation.
Methods for securing indoor switchgear.
Methods for securing Shelter-Clad switchgear.
Methods for securing common-aisle switchgear.
Methods for securing non-walk-in switchgear.
Procedures for assembling multiple shipping sections.
Specifics for connecting to a power transformer.
Detailed steps for indoor anchoring.
Detailed steps for outdoor anchoring.
Assembly steps for single aisle configurations.
Assembly steps for common-aisle configurations.
Assembly steps for single aisle with workspace.
Adding units to existing Shelter-Clad switchgear.
Anchoring non-walk-in switchgear.
Adding units to existing non-walk-in switchgear.
Material, insulation, and construction of bus bars.
Procedures for making bolted bus bar connections.
Information on epoxy insulation and safety aspects.
Procedures for installing insulation boots on bus joints.
Procedures for taping bus joints to achieve insulation.
Specific insulation requirements for transformer connections.
Requirements for insulating primary cable terminations.
Procedures for installing and connecting control wiring.
Methods for properly grounding the switchgear.
Use of temporary grounding devices.
Overview of voltage and control power transformers.
Details on mounting voltage transformers in cells.
Details on CPT placement and fuse handling.
Steps for disconnecting and connecting rollout trays.
Description and mounting of CTs in breaker compartments.
Preparing the switchgear cell for breaker insertion.
Description of the mechanism for moving breakers.
Ensures correct breaker rating is used.
Connection points for control circuits.
Operation of mechanism and truck switches.
Essential safety step before handling breakers.
General procedures for handling breakers.
Steps to de-energize control power before working.
Steps for removing breakers from standard cells.
Steps for removing breakers from non-walk-in/raised pad cells.
How to attach and use the racking crank.
General instructions for racking breakers.
Procedures for moving breakers between positions.
Verifying proper contact engagement.
Safety interlock preventing racking with closed breaker.
Padlocking provisions for racking access.
How the trip-free interlock prevents closing.
How closing springs are discharged safely.
Key points to check before energizing.
Procedures for insulation and dielectric tests.
Step-by-step process for initial operation.
Importance and recommended intervals for upkeep.
Tools and general lubrication guidance.
Comprehensive list of periodic maintenance activities.
Specific lubrication instructions for components.
Cleaning procedures and precautions for corrosive environments.
Maintenance for ancillary equipment and surfaces.
Descriptions of split plug jumpers, test cabinets, lift trucks, and slings.
Details on the optional electric racking accessory.
Application recommendations and technical data for surge limiters.
To Next Page