Siemens Hicom 300 H - Page 30

Step by Step
Administration
30
Default Route
Use this command to define the address of the router
or standard gateway that allows the phone to see the
rest of the network.
Enter the Administration menu. Access  page 17.
Select "Configuration".
Select "Network settings".
Select "Direct LAN access".
Select "Network access".
Select "Default route".
Enter gateway address (Text input see  page 41).
Click softkey.
Domain name server
Use this function to edit the address and name of the
Domain Name Server.
Enter the Administration menu. Access  page 17.
Select "Configuration".
Select "Network settings".
Select "Direct LAN access".
Select "Network access".
Select "Domain name server".
Enter DNS IP address and Domain name
(Text input see  page 41).
Click softkey.
3
1
1
2
2
A B C
Save
3
1
1
2
3
A B C
Save
The domain name can only be altered when the
system type is not set to HiPathGK. When the
system type is set to HiPathGK the domain name
is set during auto-discovery.
All manuals and user guides at all-guides.com