Siemens Hicom 300 H - Network Access

Administration
29
Step by Step
Network access
Use this command to define static routes that allow ac-
cess to network resources in other domains. The net-
work routes menu gives access to more network rout-
ing data consisting of 2 routes. This is in addition to the
default route set in the Network menu. Each route is
specified by a combination of target IP address, target
network mask and local gateway.
Network routes
Enter the Administration menu. Access  page 17.
Select "Configuration".
Select "Network settings".
Select "Direct LAN access".
Select "Network access".
Select "Network routes".
Enter target address, gateway address and network
mask for Route 1 (Text input see  page 41).
Click softkey.
or
Click softkey.
Enter target address, gateway address and network
mask for Route 2.
Click softkey.
3
1
1
2
1
A B C
Save
Next
A B C
Save
All manuals and user guides at all-guides.com